No, they have to be purchased directly from Platinum LED and shipped to Australia from the USA, simply use our discount code ‘sunstream’ to save 5% on your purchase. All pricing is in USD and excludes taxes & customs duty should the purchase exceed $1000 AUD.

It’s important to remember that Near Infrared & Red Light Therapy employs light, while infrared saunas employ heat. Both technologies deliver therapeutic benefits, but they do so in ways that are completely different to one another—yet also potentially complementary. Therefore we do not recommend installing LED Lights inside your sauna for 2 important reasons:

1. Light Therapy becomes less effective if our body is covered in a layer of sweat, so for best results use your Light Therapy device prior to sweating in the sauna or as a stand alone treatment.
2. Since your cells can only absorb a limited amount of light, treatment times are significantly shorter than your average sauna session, so use your Light Therapy device while the sauna is warming up.

Recommended Installation options:

Wheeled Rack Stand

Door Hung

External Wall of Sauna

So called ‘Full Spectrum’ and Near Infrared Saunas DO NOT meet the criteria for Photobiomodulation! Some sauna companies have added incandescent devices including simple heat lamp bulbs or halogen tube heaters to their Far Infrared saunas. These emit only small quantities of Near Infrared and do so over the entire range of Near Infrared 780nm – 1400nm.

These devices DO NOT meet the criteria for Photobiomodualtion Therapy as they provide very little energy at the specific required wavelengths in the 600nm and/or 800nm range. These devices are also too hot and therefore our skin cannot be placed close enough to absorb any of the light.

Lasers and LEDs on the other hand are capable of producing the single frequency wavelengths for therapy and can be comfortably positioned close enough to the body, even pressed right into our skin, to ensure the delivery of therapeutic levels of light energy.

To learn more about the differences between Far Infrared, Mid Infrared & Near Infrared, read our Blog: Full Spectrum Saunas – Why they may not be the best?

First, know that the BIO and BIOMAX lights are the most powerful lights on the market today. Either choice will deliver maximum therapeutic benefit that far exceeds anything else available.

The BIO series lights are our original, proven design that deliver maximum intensity in a simple to use, economical package. All BIO lights feature simple on/off power switches for ease of use and make a great starting point for LED light therapy.

All BIO lights are available in 3 different configurations: All red/660nm, all NIR/850nm or a 50/50 combination of both red/NIR. Thus, you’re able to choose the configuration that is most specific to your therapy goals.

The BIOMAX series lights are the newest and most advanced series of lights that have been developed for users that want even further increased power and advanced spectrum for improved benefit plus the ability to connect multiple panels together to make any custom size panel possible in addition to fully digital controls with built in timer.

Also, all BIOMAX lights are compatible with our tabletop stands and wheeled rack stands. BIOMAX models come in only 50/50 split of our exclusive, patent pending R+ | NIR + spectral output featuring the five wavelengths of 630nm/660nm/810nm/830nm/850nm.

For more information on this very special spectrum of red and near infrared, please check our complete blog post found here: R+ | NIR+. If you would like to see the BIOMAX digital control and timer system, please click here for our quick usage video: BIOMAX Usage Video

READ MORE >

Platinum LED currently offer all of the BIO series lights in three configurations: all red, all near-infrared and a combination of both red and near-infrared. Selecting a configuration depends on how you plan to use your therapy light. BIOMAX models come in only 50/50 split of our exclusive, patent pending R+ | NIR + spectral output featuring the five wavelengths of 630nm/660nm/810nm/830nm/850nm. For more information on this very special spectrum of red and near infrared, please check the complete blog post found here: R+ | NIR+

For the BIO series, you do have the option of using only the red or NIR spectrums or both at the same time.

Red Light wavelengths (630-700 nm) are an ideal length to penetrate skin cells and sebaceous glands, offering benefits for skin texture and tone, smoothing fine wrinkles, promoting collagen production and generally rejuvenating the appearance of skin.

Near-infrared (NIR) light wavelengths (700-1100 nm) penetrate deeper into the tissue to deliver energy to the body’s cells and can pass through bone to assist with healing deep wounds, muscle aches, nerve injury or joint pain.

Devices with a combination of red and near-infrared (NIR) wavelengths deliver benefits of both, offering the most versatile range of use.

READ MORE >

Each PlatinumLED Therapy Light comes with everything you need to experience the benefits of LED light therapy in your home or office. Getting started is as simple as unpacking your PlatinumLED Therapy Light, plugging it in and basking in the glow of the powerful LEDs over bare skin on your desired treatment area. 

We include mounting hardware, a door hanging kit and protective eye wear for your convenience. You can also download our free PlatinumLED Therapy Companion app for device setup tips and treatment time suggestions. As a general rule of thumb, we’ve found that 10-15 or even 20 minutes per day, per session at a distance of around 6″-12” on bare skin with a max of 2-3 treatment areas per day to be a great starting point for basically all applications. The dosage with the light will depend on your individual tolerance to the light as some individuals react better to more light and some to less. The best way to approach would be to start with less time and work your way up as your tolerance to the light is found.

As for exact dosage recommendations, you will find many sources online or in books and many may contradict one another. You as the user are of course free to experiment with the lights as you wish and follow any treatment regimen that you may find.

If you wish to calculate your exact dosage in terms of joules or mW/cm2, the outputs for each series of light are found on their respective sales page along with the footprints of each light at various distances.

For joules calculations, please view our full article found here: The Definitive Guide

For questions or guidance, please email us anytime or call our toll-free customer service line at 844-533-4769 from 9AM to 5PM PST, Monday through Friday.

READ MORE >

First, know that both the BIO and BIOMAX lights are the most powerful lights on the market today. Either choice will deliver maximum therapeutic benefit that far exceeds anything else available. The BIO series lights are our original, proven design that deliver maximum intensity in a simple to use, economical package.

All BIO lights feature simple on/off power switches for ease of use and make a great starting point for LED light therapy. All BIO lights are available in 3 different configurations: All red/660nm, all NIR/850nm or a 50/50 combination of both red/NIR. Thus, you’re able to choose the configuration that is most specific to your therapy goals.

The BIOMAX series lights are the newest and most advanced series of lights that have been developed for users that want even further increased power and advanced spectrum for improved benefit plus the ability to connect multiple panels together to make any custom size panel possible in addition to fully digital controls with built in timer.

Also, all BIOMAX lights are compatible with tabletop stands and wheeled rack stands. BIOMAX models come in only 50/50 split of our exclusive, patent pending R+ | NIR + spectral output featuring the five wavelengths of 630nm/660nm/810nm/830nm/850nm. For more information on this very special spectrum of red and near infrared, please check our complete blog post found here: R+ | NIR+.

In short, all electrical devices that use electricity to operate will indeed generate some type of EMF as a by product of electrical consumption.

However, thanks to the advanced shielded components used in all of our lights, PlatinumLED Therapy Lights have ZERO detectable EMF emissions at the minimum usage distance of 4″-6″. ZERO. To openly verify this claim, we have produced a video in which we even perform a live EMF test with our lights. Please check our full EMF post and video found here: EMF Blog + Verification Video

READ MORE >

If you are looking for a users manual for our lights, please download the most recent digital version here: PlatinumLED Users Manual Download